|
Unified graphics environment for synthesing a design and reviewing its analysis results provides users with unlimited capabilities of modeling structures from simplest to most complicated ones thus answering to needs of experienced professionals and remaining friendly to beginners at the same time.
|
Structure CAD (SCAD) |
| The application "Kristall" belongs to a family of specialized stand-alone applications - satellites of the SCAD package; it is oriented at solving practical problems of expert investigation and design of structural steelwork.
|
Kristall |
| The ARBAT application is intended for selection and verification of existing reinforcement in ferroconcrete structural elements (continuous beams and columns), and for calculation of deflections in ferroconcrete beams in compliance with SNiP 2.03.01-84* Concrete and ferroconcrete constructions. Analysis is performed according to the theory of limit states of 1st and 2nd group for rated stress combinations (RSC) selected automatically depending upon loads specified in compliance with requirements of SNiP 2.01.07-85 Loads and influences. |
ARBAT |
| The COMEIN application is intended verification of existing elements of masson structural elements in compliance with SNiP II-22-81 |
COMEIN |
| The Decor application is intended verification of existing elements of of wooden structural members in compliance with SNiP II-25-80 |
Decor |
| The Zapros application does various kinds of analyses and checks of elements of beds/foundations for compliance with requirements of SNiP 2.02.01-83* and SP 50-101-2004, SNiP 2.02.03-85 and SP 50-102-2003. |
Zapros |
| The application Monolit is intended for designing ferroconcrete monolithic finned floors formed by a complex of panels and beams supported by columns and(or) walls. The software has been developed in compliance with requirements of regulatory codes currently in effect (SNiP 2.03.01-84 "Concrete and ferroconcrete structures. Building fundamentals and regulations.", GOST 21.503 - 80. System of project documentation for construction. "Concrete and ferroconcrete structures." Working drawings, GOST 21.103 - 78. System of project documentation for construction. "Main inscriptions."). |
Monolit |
| The application WeST is intended for calculation of loads and loadings on buildings and structures according to SNiP 2.01.07-85*. |
West |
| The application CROSS is intended for calculation of coefficients of subgrade reaction for structures on elastic foundations. |
CROSS |
| The Section designer is intended for purposes of building any types of compound cross-sections out of steel rolled profiles and plates, and calculating their geometry properties necessary for structural analysis.
|
Section designer |
| The Consul is intended for purposes of building any types of cross-sections and calculating their geometry properties necessary for structural analysis.
|
Consul |
| The Tonus is intended for purposes of building any types of thin-wall cross-sections and calculating their geometry properties necessary for structural analysis. |
Tonus |
| The Sezam program is intended for a section searching (in this version only for a box, an I-beam or a channel), the most similar approximates the arbitrary section according to its geometric properties having been set by a user. |
Sezam |
| The COMET software pack is intended for analysis and design of structural steel joints used in industrial and civil engineering. The application implements an approach which use a set of parametric designs of joint units (prototypes) to design a particular joint. In the course of designing, prototype parameters are changed depending upon specific conditions of their application (loads, material etc.) and design regulations to be complied with. |
COMET |
| The CoCon is electronic handbook on stress concentration factors. |
CoCon |
| The KUST is electronic design-theoretical handbook. |
KUST |
